Comtech EF Data Vipersat SLM-5650A, Инструкция по установке и эксплуатации

Страница: 207 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–13 MN-SLM-5650A
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Tx Modulation
Type
TMD= TMD? 1 byte Command or Query.
Sets or returns the Tx Modulation Type in the form x, where:
0 = BPSK
1 = QPSK
2 = OQPSK
3 = 8PSK
4 = 16QAM
5 = 8QAM
Note: Depending on FEC type, not all selections will be valid.
Example: <0001/TMD=1{CR} (selects QPSK)
TMD=
TMD?
TMD*
TMD#
TMD=x
Tx Code Rate TCR= TCR? 1 byte Command or Query
Sets or returns the Tx Code Rate in the form x, where:
0 = 1/1 (Uncoded)
1 = 1/2
2 = 3/4
3 = 7/8
4 = 2/3
5 = 5/6
6 = 21/44
7 = 5/16
8 = 17/18
9 = Reserved
A = Reserved
B = .541
C = .451
D = .378
Note: Depending on the active FEC Type, not all selections will be
valid.
Example: <0001/TCR=1{CR} (selects Rate 1/2)
TCR=
TCR?
TCR*
TCR#
TCR=x