ROSS
MN/13070
Exports all Service Bound polygons in the
Service Area as a KML file.
Imports all polygonal areas from a KML
file into Service Bounds
Insert a new Service Bound
Delete an existing Service Bound
Edit Advanced Switching Modulation Table
Edit the points (coordinates) in a Service Bound polygon
Demotes the selected SB entry to the
adjacent lower position the search order
Promotes the selected SB entry to the
adjacent higher position in search order
As illustrated above, the dialog is displaying three Service Bounds for a selected Service Area.
The three columns displayed are the label (description), number of points in the service bound
polygon, and approximate center coordinates of the service bound geographic area.
Service Bound Search Order
The order in which service bounds are searched to determine whether a handoff is necessary is
follows the declaration order of each Service Bound in list. Use “Up” or “Down” to change search
order. Overlapping Service Bounds should be ordered from smaller areas first to larger areas last.
Each service bound entry can be modified by clicking the “Bounds” button that will open a new
editor. The Service Bounds editor is show below. Points that comprise the polygonal service
bound can be edited in place by selecting the value in the row.
Comtech EF Data, Vipersat Products
Page 59 of 87
