1
General Operation
The Sniffer Shadow has one multifunction button on the front. Press
the button momentarily to power on the unit. The speaker sounds a
single beep. Hold the button for two seconds to power off. The speaker
sounds a double beep.
The Shadow has two modes of operation. The unit is in Measure mode
when the lid is fully open and the display is active. It is in Monitor mode
when the power is on and the lid is closed. In Monitor mode, the
indicator light flashes green at five-second intervals.
Fully opening the lid powers on the Shadow and activates the Measure
mode. Opening the lid illuminates the display backlight for ten seconds.
Press the button momentarily to re-activate the backlight when
needed. Closing the lid activates the Monitor mode.
In Monitor mode, a momentary press of the button mutes the warble
tone alert for five minutes. Opening the lid cancels the mute function.
Battery Care
An internal Lithium Ion rechargeable battery powers the Sniffer
Shadow. Charge the battery for three hours before using the unit for
the first time. Only use the included AC Charger to charge the battery.
Use of other chargers may cause equipment failure, create a safety
hazard, and void the warranty.
The Shadow has one visible multifunction indicator light. The light is
red when the battery is charging and turns green when the battery is
fully charged. If the ambient temperature is out of range (too hot or
too cold), the light flashes in red and the battery will not receive a
charge. This feature prevents premature failure of the battery due to
charging at temperature extremes.
The Shadow will not operate when charging the battery.
Содержание Sniffer Shadow
Страница 1: ...User Guide...
