DF PROFI II PCIe - Installation Instruction
Installation of the Board
Ó
COMSOFT
V1.1 / 29.07.2008
1
1
Installation of the Board
The DF PROFI II PCIe is a plug&play-compatible board for PCI-Express-Slots. The
configuration entirely takes place by means of the delivered software or the BIOS of your PC
respectively. Thus, no jumpers or DIP-switch adjustments are necessary.
To mount the board, please proceed as follows:
·
Switch off your PC and unplug the mains plug!
·
Remove the screws of the PC cage and lift off the cover. If necessary,
please see also the operating instructions of your PC.
·
Select a free PCI-Express X1 slot.
·
Remove the slot cover and plug the DF board into the determined slot. Pay attention
to a proper adjustment of the board in the guidance (avoid canting !).
·
Screw down the board.
·
Fix the cover again and screw it down.
Remark
: When mounting, please follow the safety instructions for
electronic modules against electrostatic charge.
Figure 1: DFPROFI II PCIe - Board
