Comset CM685VX, Руководство пользователя

Страница: 61 / 108

CM685VX User Manual
61
www.comset.com.au
 Enable : Enable this instance.
 Server : Domain name or IP address of PPTP server.
 Username : Server authentication username.
 Password : Server authentication password.
 Remote LAN subnet : This is the remote subnet which can be accessed via PPTP
tunnel, such as 192.168.10.0.
 Remote LAN netmask : This is the netmask for the remote LAN subnet, such as
255.255.255.0.
 MTU : Maximum Transmission Unit.
 Keep Alive : Number of unanswered echo requests before considering the peer dead.
The interval between echo requests is 5 seconds.
 Use DNS servers advertised by peer : If unchecked, the advertised DNS server
addresses are ignored.
 MPPE Encryption : Microsoft Point-to-Point Encryption.
 Debug : Adds verbose PPTP log in system log.
 Restart module when PPTP connect fails : In some networks, PPTP cannot connect
until the module is restarted.
 PPTP Server Configuration
 PPTP Local IP : Indicates the server’s IP address.
 PPTP Remote IP start : The remote IP address lease start.
 PPTP Remote IP end : The remote IP address lease end.
 ARP Proxy : If the remote IP has the same subnet as the LAN, check it for connecting
with each other.
 MPPE Encryption : Microsoft Point-to-Point Encryption.
 Debug : For PPTP server debug, the log can be monitored in the system log.
 Username : Server authentication username
 Password : Server authentication password.