Comset CM685V-6, Руководство пользователя

Страница: 10 / 88

CM685V-6 User Manual
10
www.comset.com.au
.
Attention:
1. If you are not using the AC adapter supplied with the router, and if you wish to power
up the unit using the terminal block, the power cable should be wired with the correct
voltage polarity. Wrong wiring will destroy the equipment. Pin 1 and Pin 2 are reserved
for power, where Pin 2 is “GND” and PIN 1 is power input “Vin”(DC5~40V).
I/O Terminal on router Serial port (RS485 or
RS232)
Port 3 (GND) Pin 5
PIN Signal Description Note
1 VCC
+5-40V DC Input,
+5~50V optional Current: 12V/1A
2 GND Ground
3 TX Transmit Data
4 RX Receive Data
5 PGND Ground
6 RST Reset
The Reset Pin has the same
function as the reset button.
Simply short the RST pin with
the GND Pin and hold for 3 sec
and the device will restore to
factory settings. If you hold for
1 sec, the router will reboot.
7 DIO0
General Purpose
I/O
8 DIO1
General Purpose
I/O
9 NC Not connected