Put Comrex On The Line.
Toll Free in USA: 800-237-1776 • www.comrex.com
e-mail: [email protected]
19 Pine Road, Devens, MA 01434 USA
Tel: +1-978-784-1776 • Fax: +1-978-784-1717
Step 2
You must provide a connection between pins 1 and 5 on the Multipurpose Port located on the “power rear
panel” of the BlueBox. Using a switch or relay contact between those pins would allow you to make the
BlueBox dial and redial (while in STL Backup Mode) when the contact is closed, and drop the call and
enter a “waiting” mode when the contact opens. If you were to jump these two pins together with a wire on
a plug, the BlueBox would repeatedly dial while in STL Backup Mode, with no way to hang up except by
pressing the Hangup key causing the unit to exit STL Backup Mode.
Step 3
The BlueBox will dial the number stored in Qdial 01. You should program that number before attempting to
use STL Backup Mode. Programming instructions are as follows:
