FT-MBKG20-HRN Installation Guide
Data Controller (DC)
Remote Start for Mercedes
KeylessGo
Copyright 2011 Firstech, LLC. | 2
www.compustar.com
888.820.3690
Class
Year
CAN Block
KeylessGo Module
C
2008-2011
Passenger front door jamb
in wire trough
Right side of trunk near tail
light
CL, S
2007-2010
Under rear of driver’s front
seat
Right side of trunk near tail
light
CL, S
2011
Under rear of driver’s front
seat
Left side of trunk behind
metal bracket
CLS
2012
Passenger front door jamb
in wire trough
Right side of trunk near tail
light
E coupe/sedan
2010-2011
Passenger front door jamb
in wire trough
Right side of trunk near tail
light
E convertible
2010-2011
Passenger front door jamb
in wire trough
In trunk behind rear seat
back (remove carpet trim)
E wagon
2011
Passenger front door jamb
in wire trough
Right side of cargo area
behind bracket
GL
2006-2011
Right side compartment in
cargo area
Right side compartment in
cargo area
GLK
2010-2011
Passenger front door jamb
in wire trough
Center of cargo floor under
carpet
ML*
2006-2011
Passenger front kick panel*
Right side compartment in
cargo area*
R*
2006-2010
Passenger front kick panel*
Below spare tire in cargo*
R*
2011
Passenger front kick panel*
Under false floor behind
driver’s seat*
*ML and R class do not require to change connector plug (steps 10-14 not required). Just plug
into the extension harness once the correct connector is found in the block.
12. Close the retaining clip and put the empty connector housing back into the CAN block. (See
images below)
13. Insert the pins into the provided plug housing making sure the polarity is correct with the
extension harness coming from the DC control module.
14. Close the retaining clip on the new connector.
15. Plug the connector into the harness from the DC control module.
Please see the step by step images below for details on the KeylessGo connection:
Brown/Red--->Brown/Red
•
Brown--->Brown
•
Module Location Table
