background image

20

19

No.7 Black/White : Negative Input for Optional Sensor

When installing additional sensors, use this wire as the input wire to the alarm

module for those sensors. When connecting more than one sensor to any input

wire, you must diode isolate the output wires of each sensor. Otherwise, they

could back feed into each other, causing false alarms or sensor damage.

1

2

3

Door Lock/Unlock Pulse Duration 

Application of Pre-wired Kill Relay 

Door Open  Parking Light Indicator

0.8 Sec 

Starter Kill

Disabled

4 Sec

Anti-jacking

(IG-kill) 

Enabled

Features

(Factory Default)

(Optional Setting)

No. 1 Black 

: L.E.D. Ground

No. 2 Black / White

: L.E.D. 3v Positive

When installing the antenna wire, please take care to not excessively bend or
twist it. Excessive or sharp bending or severe twisting can be the cause of
inoperability or range issues.

1. Door Lock/Unlock Pulse Duration

This option determines the output duration of the lock and unlock pulses 
Some Vehicles do not respond to short lock/unlock pulses. 

2. Application of Pre-wired Kill Relay

This option requires that the starter kill relay be installed in the ignition circuit,
rather than into the starter circuit. With this option turned on, Panic mode will
become Anti-Jacking mode. If Anti-Jacking is activated while the vehicle is
running with the key in the ignition, the siren will sound for 30 seconds. 
After 30 seconds the system will break the ignition circuit, therby disabling the
vehicle. The siren will continue to play for 1 more minute. With this option
turned off, when Panic mode is activated, the system will arm, activate the
starter kill, and play the siren for 1.5 minutes. 

3. Door Open Parking Light Indicator

With this option enabled, the parking lights will flash if a door is left open 
while the vehicle is being armed. This serves as a warning that all of the 
doors have not been closed.  

Option Menu

No. 1 Black   

: Shock Sensor Ground

No. 2 White

:  2nd Stage Shock Sensor Input

No. 3 Red  

: Shock Sensor 12v Positive

No. 4 Yellow

: 1st Stage Shock Sensor Input

CON 5

CON 4

Antenna

4

30 sec Passive Relock

Disabled

Enabled

5

Double Pulse Unlock

Disabled

Enabled

Содержание CM1000A













Отзывы: