manualshive.com logo in svg

CompUSA 333626, Инструкция по установке и эксплуатации

Поделиться
Скачать
CompUSA 333626 Скачать руководство пользователя страница 10

 

10

 

Parameter Description 

Ad Hoc Wireless Mode 

When your Mini USB Adapter is set to Ad Hoc (Peer to Peer Mode), you can designate the 

wireless connection mode for the Ad Hoc network. 

802.11 B only

 – Your adapter will be compatible with 802.11b wireless stations ONLY. If 

there are only 802.11b wireless stations in the network, you can set your Mini USB 

Adapter to this mode. 

 

802.11 B/G mix

 – If you have a mix of 802.11b and 802.11g wireless stations in your 

network, it is recommended to set your Mini USB Adapter to this mode. (This mode is the 

default setting.) 

 

802.11 G only

 – Your adapter will be compatible with 802.11g wireless stations ONLY. If 

there are only 802.11g wireless stations in the network, you can set your Mini USB 

Adapter to this mode. 

 

 

Preamble 

The preamble defines the length of the CRC block for communication among wireless 

devices. This option is only active in the Ad Hoc mode. 

 

There are two modes including Auto and Long Preamble. If “

Auto

” mode is selected, your 

Mini USB Adapter will auto switch the preamble mode depending on the wireless network 

that your Mini USB Adapter is connecting to. 

 

 

RTS Threshold 

Minimum packet size required for an RTS (Request To Send). For packets smaller than 

this threshold, an RTS is not sent and the packet is transmitted directly to the wireless 

network. Select a setting within a range of 0 to 2347 bytes. (It is recommended to keep the 

default settings). 

 

 

Fragment Threshold 

This value defines the maximum size of packets; any packet size larger than this value will 

be fragmented. If you have decreased this value and experience high packet error rates, 

you can increase it again, but it will likely decrease overall network performance. Select a 

setting within a range of 256 to 2346 bytes. (It is recommended to keep the default 

settings). 

 

 

Channel 

This setting is only available for Ad Hoc mode. Select the number of the radio channel 

used on your network. The channel setting of your Mini USB Adapter is REQUIRED to be 

the same as the network you are connecting to. 

 

Содержание 333626
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды