Compuprint PageMaster 1600c, Руководство пользователя

Страница: 16 / 212

6HS
&RPSXSULQW3DJH0DVWHUF8VHU*XLGH
6DIHW\3UHFDXWLRQV
Always use the power cord provided with your printer. When an extension power cord is
required, always use a properly rated cord.
If you use a cord with an unspecified current rating, the printer or plug may emit smoke or
become hot to the touch.
Do not attempt to modify, pull, bend, chafe, or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause fire or electric shocks.
Never touch a power cord with wet hands. This constitutes an electric shock hazard.
Stop operation immediately if your printer emits smoke, excessive heat, unusual noise or
smell, or if water is spilt onto the printer. These conditions can cause fire. Immediately turn
off and unplug the printer, and contact your Compuprint Customer Support Center.
To prevent fire or electric shocks, follow the instructions below based on your printer's con-
figuration. If in doubt, contact your Compuprint Customer Support Center.
Never connect the earth wire to any of the following:
z
Gas pipes, which can be ignited and explode
z
Telephone line earth wires or lightning rods, which can draw an excessive electric current
if hit by lightning
z
Water faucets or pipes whose electrical conductivity is broken by a non-metallic part
If the power cord is broken or insulated wires are exposed, ask your Compuprint Customer
Support Center for a replacement. Using a damaged cord can cause fire or electric shocks.
&DXWLRQV
Do not unplug or replug the printer while it is on. Unplugging a live connector can deform
the plug and cause fire.
When unplugging the printer, grasp the plug instead of the cord. Forcibly pulling on a cord
can damage it and cause fire or electric shocks.
Be sure to switch off and unplug the printer before accessing the interior of the printer for
cleaning, maintenance, or fault clearance. Access to a live printer's interior can cause electric
shocks.
Once a month, unplug the printer and check the power cord for the following:
z
The power cord is plugged firmly into a receptacle.
z
The plug is not excessively heated, rusted, or bent.
z
The plug and receptacle are free of dust.
z
The cord is not cracked or frayed.
If you notice any unusual conditions, contact your Compuprint Customer Support Center.