Page | 7
Louroe Intercom and Microphone Components:
Speaker / Mic Specifications:
Output:
Line Level 90 dB @ 1K
Ω
Sensitivity Mic:
-65 dB ± 4 dB
Current drain:
4 mA
Speaker:
4”, 8
Ω
w/70V Transformer
Power Rating:
4W
Face Plate Dimensions:
6 ½” H x 8” W
Backbox for TLM-W:
Surface Mount Box (metal):
6 ½” H x 8” W x 2 ¾” D
Flush Mount Box (Plastic):
5” H X 6 7/8” W x 2 7/8”D
Total including Flange:
6 ¼” x 8” W X 2 7/8” D
Base Station Specifications:
Input Sensitivity:
.78 Vrms
Monitor power Output:
1.5W @8
Ω
Talk back power Output: 1.5W into 70V line
Input sensitivity:
-55dB
Audio Line output imped: 600
Ω
or Higher
Audio input impedance:
10K
Ω
Audio frequency response: 100 Hz
to 10 kHz
Power input:
24Vdc, 1A or 24 Vdc, 1.5A
Dimensions:
8” W x 10” D x 2 ¼” H
Shipping Weight:
10lbs (4.5 Kg)
Intercom/Audio Cable:
Intercom Cable: West Penn 356 or equivalent
One (1) 4 Conductor Shielded with Ground wire, 20AWG cable, Non-twisted Pair
and Stranded Coming out into a single gang box.
Audio Cable: West Penn 452 or equivalent
One (1) 2 Conductor Shielded with Ground wire, 20AWG cable, Non-twisted Pair
and Stranded
Cables above Ceiling: Direct Runs
-
10ft. Service Loop in the Patient Room and Control Room
- Soldered to a RCA Connector with 10 ft of Service Loop
Red: Source
Back: Negative
Drain: Negative
