Hayetsira St. 17, Yokneam, Israel
Tel: +972-48-290-168 | Fax: +972-48-325-251 | www.fit-iot.com
www.fit-iot.com
Page 17 of 19
Tensor-I22 owner’s manual
Connecting Tensor-I22
1.
Before connecting Tensor-I22, please ensure that RAM and storage device are installed as detailed in the
above sections.
2.
Connect the display to Tensor-I22 using HDMI, or mini-DP cable.
3.
Connect to Tensor-I22 USB keyboard and mouse.
4.
Insert the DC plug into the Tensor-I22 DC-in jack. Rotate clockwise 90° to secure.
5.
Slide into the power-supply the AC blade correct to your country and plug the power-supply into an AC-
outlet. The power button on Tensor-I22 should turn green, in a few seconds an image should appear on the
display.
6.
Connect Ethernet cable as needed. When link is established, the link LED on RJ45 should light.
7.
If Tensor-I22 has WiFi adapter installed you will observe two SMA connectors (gold color screws) on the
side panel. Connect the included antennas by screwing them clockwise onto the SMA connectors to enable WiFi
communication.
8.
If Tensor-I22 has LTE modem assembled - connect the included antennas by screwing them clockwise onto the
SMA connectors to enable Cellular communication.
Entering BIOS Setup
Turn off the Tensor-I22.
Turn on while holding down the Del key, until access into BIOS utility.
https://fit-pc.com/wiki/index.php?title=Tensor-I22.
Installing and booting operating system
Please consult
https://fit-pc.com/wiki/index.php?title=Tensor-PC_Software
for instructions.
Содержание Tensor-I22
Страница 1: ...Owner s Manual Revision 1 2 Oct 2022 ...
