Hayetsira St. 17, Yokneam, Israel
Tel
:
+972-48-290-168
www.fit-iot.com
www.fit-iot.com
Page
10
of
14
Airtop2 owner’s manual
Storage
Airtop2 supports 6 independent storage
devices: 2x NVMe / SATA SSDs and 4x 2.5”
SATA HDD / SSD.
All storage devices support RAID.
All storage devices are passively cooled by a
dedicated large heatsink.
NVMe / SSD
Airtop2 supports 2x NVMe / SATA SSD with a form factor of M.2 M-Key 2280 | 2260 |
2242
The NVMe devices each has PCIe x4 interface.
The SSDs are installed by fastening each to the SSD cooling plate using the red spacer
and a pan-head screw.
Please note the position and direction of the red spacer:
•
Position is according to the length of the SSD – 2280 being the largest.
•
The spacer has a step that fits the edge of the SSD.
After one or two SSDs are mounted to the SSD cooling plate please proceed as follows:
•
Insert the edges of the SSDs into their slots.
•
Push down the SSD cooling plate and tighten both flat-head screws to keep the
SSDs and SSD cooling plate in place.
Содержание Airtop2
Страница 1: ...Owner s Manual Revision 1 2 9 Jul 2018...
