P.O. Box 749 Peekskill, NY 10566 Tel: (845) 737-7009 Fax: (845) 737-0426 Web: www.compuvideosystems.com
PALS-4 LOOPING SEQUENTIAL SWITCHERS
INSTALLATION AND OPERATING INSTRUCTIONS.
The PALS-4 sequential switchers have the following features:
*Remote activated sequencing
*Home, Scan and Bypass control for each input
*NTSC and PAL color compatible
*Vertical interval switching
*UL listed power pack
*Low power consumption
Each switcher kit should contain each of the following items:
*Instruction sheet
*Power Pack
*Switcher
You will need to provide:
(1) 1/4” RCA phone plug, stereo or mono (RADIO SHACK #274-1539)
(X feet) of 1 pair wire to connect switcher to control relay contacts or
(N.O.) Normally Open Momentary Push Button
SYSTEM CONNECTIONS:
1)
Connect the power supply to the switcher by pushing the power connector into the rear
of the switcher until it can go no further.
2)
Plug in the power pack to a 115VAC source.
3)
Wire the Phono Plug to the following diagram and install it in the connector on the front
of the switcher:
Sleeve
Tip
PHONE PLUG
For additional buttons, simply connect them in parallel
Momentary Relay or Button
