˙
Connect an Ethernet cable between IP camera and your
wireless switch/router.
˙
Attach the power adapter to the camera’s power
connector and connect the power cable to a power
outlet.
˙
Make sure your smartphone is able to access the
internet via your switch/router. Then follow the step 2
and 3 to setup your camera.
If you don’t have PoE device, you also can use the Ethernet
cable and power adapter/cable to setup your IP camera .
Mount the Camera
Name of Each Part
Wired Setup (Without PoE)
Follow the instructions below to mount the camera on the wall or ceiling
Fix the mounting plate.
Attach the IP camera.
Loosen the screw that fixes the
trapezoid-shaped fastening bracket
Let fastening bracket slide into its position
on the camera base (as circled).
Push and hold the fastening bracket to
the right.
Tighten the screw on the fastening
bracket.
IR LEDs
IR LEDs
Lens
Ststus LED
Light
Sensor
Microphone
Pinhole
LAN
Reset/WPS
Button
Audio
Output
microSD/SDHC
Card Slot
Microphone
Input
Power Adapter
Port
I/O Box
Connector
Wireless
Switch/Router