Compressor Supreme Force Feedback
User Manual
Page 5
8. Programming the Gear Shifter
for manual transmission
1. Every game has different buttons for gear shifting. Find out the Up Shift button first.
2. Press the „TEACH” button. The orange light will turn on.
3. Hold the Gear Shifter either up, down, left or right.
4. Press the button that was identified as the Up Shift button. Compressor Supreme will vibrate to
indicate completion of programming.
5. Press the „TEACH” button once to original operating mode.
Press „Teach” button,
Hold a shift position
Press a „Fire” button
Press „Teach” button to
Orange light on
or gear button
or direction pad
original operating mode
Repeat the above procedure to program Down shift accordingly.
9. Minimum System Requirements for PC
1. IBM PC or compatible with Pentium II 233 or above processor, and 64 MB RAM or more.
2. One or more USB port.
3. Windows 98 second edition, Windows Me, Windows 2000 or Windows XP.
4. Direct X 6.0 or above installed.
10. To install system driver
Insert the floppy diskette or CD ROM included into the drive.
1. Click „Run (R)” at „Start” (which is at lower left corner of Windows).
2. Click „Browse” to choose „Setup”.
3. Click „O.K.”
4. Run according to instructions on screen.
5. Connect up the adapter to the PS2 plug of steering wheel first. Then, connect the USB plug to
your computer. A message of „New hardware detected” will be displayed and a HID driver will
be installed automatically.
NOTICE:
There is no problem for plugging into the steering wheel to computer be-
fore or after the installation of driver from disk.
+
