Comprehensive CHE-HDBTWP230K, Руководство пользователя, Страница: 11 / 20

9
Push Button Control
◆
A/V Source Selection
Press Select : select the source in sequence (S1
→
S2
→
S3
→
S1…)
◆
Stand ‐ by mode:
Press and hold both of Select button for 5 sec. and release right after Remote LED flash Green .
Then when the Remote LED flashes Blue once per 3 seconds, the system is in the stand-by mode.
And just follow the same steps to wake up from stand-by mode.
Operation
 Screen Shift Mode (Select VGA Input)
Step 1. Press two buttons (
Select &
Alt.
)
simultaneously over 2 sec. and release the buttons RIGHT AFTER
VGA LED turns to flash Pale Blue.
Step 2. Press left button ( Select ) or right button ( Alt. ) to adjust image's position.
NOTE:
1. The system will automatically retain user's last setting.
2. Max. horizontal image displacement is 50 steps.
3. The system will automatically escape from shift mode if no activity is detected within 15 seconds, or directly press
the two buttons simultaneously over 2 sec. again to leave the shift mode right away.
 Resolution Alteration Mode (Select VGA Input)
Under some particular video resolution issue, the VGA LED will turn to emit Blue and flash Orange twice when
catching multiple similar video timing.
Step 1. Press the button (
Alt. ) over 2 sec.
Step 2. LED flashes Purple once indicating the setting working
NOTE:
1. The system will automatically retain user's last setting.
2. Press the button over 2 sec. again to select next available resolution or switch back to the previous resolution.

EDID Copy:
Copy Remote Monitor EDID
Step 1. Apply power to the unit.
Step 2. Use CAT5 to connect Remote unit to Local unit and the (EDID complian t) monitor connects to the Remote Unit. Power on
the monitor.
Step 3. Press and hold the button “EDID COPY” around 3 sec. and release the button RIGHT AFTER the Remote LED
flashes GREEN.
Result.
If the Remote LED returns to normal status, indicating that the EDID Copy is completed.
Copy Local Monitor EDID
Step 1. Apply power to the unit.
Step 2. Connect the (EDID complian t) monitor to local output port “Local OUT” of the Unit and power on the monitor.
Step 3. Press and hold both of the buttons “EDID COPY” around 6 sec. and release the button RIGHT AFTER the Local
LED flashes BLUE.
Result. If the Local LED returns to normal status, indicating that the EDID Copy is completed.