6 / 8
HDMI output for display.
HDMI OUT
IR IN
IR input port for receiving the signal of IR remote.
IR OUT
IR output port for control of display device. This IR output signal
is from IR IN port of the Transmitter.
DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either
transmitter or receiver is connected to 24V/1A power supply,
the other doesn’t need power supply.
RJ45 connector for connecting the HDBT OUT port of the
Transmitter with CAT 5e/6 cable.
SWITCH
Press the button to switch the output audio signal source for
SPDIF OUT and L/R OUT port.
SERVICE port
Firmware update port.
DC 24V
HDBT IN
LAN
Connect to Internet device such as PC or laptop.
SPIDIF LED
Green LED is on when SPDIF OUT port outputs the the
audio signal returned from SPDIF IN on the Receiver.
3-pin Phoenix connector for RS232 command transmission,
supporting RS-232 command pass-through between the
Transmitter and Receiver.
RS-232
SPDIF IN
SPDIF connector for optical audio input.
Two USB 2.0 ports Connect to USB device.
Connection Signal
Indicator lamp
(on the left side of the
HDBT IN port)
▪ Illuminate: Transmitter
and Receiver are in good connection
status.
▪ Flash: Transmitter and Receiver are in poor connection
status.
▪ Dark: Transmitter and Receiver are not connected.
Data Signal
Indicator lamp
(on the right side of
the HDBT IN port)
▪ Illuminate: HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.