DC 24V
Plug the DC 24V power supply into the unit and connect
the adaptor to an AC outlet. (
Note:
The transmitter can
power the receiver via a CAT cable.)
5.2 HDBaseT Receiver
-5-
HDBT IN
Connect to the HDBT OUTPUT port on the transmitter
with a CAT cable.
HDMI OUT
HDMI output port, connect to HDMI display device such
as TV or Projector with an HDMI cable.
No.
Name
Function Description
1
2
3
Power Indicator
When the receiver is powered on, the power indicator will
be on.
4
SERVICE port Used for firmware update.
7
DC 24V
Plug DC 24V/1A power supply into the unit and connect
the adapter to an AC outlet.
(
Note:
The HDBaseT receiver also can be powered by the
transmitter via a CAT cable.)
10
11
SERVICE
IR IN
IR OUT
HDMI OUT
DC 24V
HDBT
IN
AUDIO OUT
1
2
3
10
4
11
7
8
9
Data Signal
Indicator lamp
(Orange)
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
Connection
Signal Indicator
lamp (Green)
Data Signal
Indicator lamp
(Orange)
5
6
▪ Illuminating: Transmitter
and Receiver are in good
connection status.
▪ Flashing: Transmitter and Receiver are in poor
connection status.
▪ Dark: Transmitter and Receiver are not connected.
▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
5
6
