Comprag AV-Series, Руководство по эксплуатации

Страница: 21 / 96

21 COMPRAG Screw air compressor AV-Series
Select the usage parameters using the up and down buttons and enter .
SET P, T, FREQ
SET TIME
OPERATION MODE
SEQ PARAM SET
RST MAINT TIME
MAX RUN TIME
USER PASS:
LANG.
SET P, T, FREQ — set pressure and temperature
(Below are the example set values for the compressor with the max. 8-bar operating pressure).
P LOAD 05.2 BAR If the compressor is ready, it switches at this pressure to loaded running.
P ULD 08.00 BAR At this pressure the compressor switches to idle running.
FREQ P 007.0 BAR Set pressure of the frequency inverter.
T FAN 0095°C
Switch-on temperature of the fan.
T FAN STOP 0060°C Switch-off temperature of the fan.
RAT. POWER 75.0kW Rated power of the electric motor.
RATED SPEED 2940RPM Rated speed of the electric motor.
SET TIME
FAN DELAY: 0002S
Delay in overloading fan.
LOAD DELAY: 0002S Delay in load run (suction valve open).
IDLE DELAY: 0300S Idle run time. Suction valve closed, and main motor running.
STOP DELAY: 0005S Switch-off delay with off button. Suction valve closed, and main motor running.
START DELAY: 0040S Delay in restart. Drop in system pressure.
SPEED INCR: 0625 PID setting for the maximum speed increase.
SPEED DECR: 0625 PID setting for maximum speed reduction.
Operational mode
RUN REMOTE/LOCAL
Switch on by remote control or locally via the control.
LOAD AUTO/MANUAL Loaded running/idle running automatically or manually.
COM: PC/BAN/GRP Communication mode: PC / MODBUS / group.
COM ADDRESS: 001 Communication port, network address.