Comprag AF-016, Руководство по эксплуатации

Страница: 8 / 44

8
Version 3.0
9. If there is any suspicion of overheating, combustion or other emergency, turn off the
equipment. Immediately disconnect it from the power supply. Do not open the doors of
equipment until the temperature falls to room temperature, in order to prevent burns or
injury.
10. Naked flames must not be used as a light source for inspecting and checking equip-
ment.
11. Never use caustic solvents, which may damage materials of the pneumatic system.
12. After performing installation or other work, ensure that no instruments, rags or spare
parts have been left inside the equipment.
13. When replacing filters, separators etc., wipe away dust, dirt and oil residue from the
area where they are installed with a dry cloth.
14. Protect the motor, air filter, electrical components and control components etc. from
coming into contact with condensate. For instance, blow down with dry air.
15. Use protective gloves during installation and repair work in order to avoid burns and
injury (for instance, during oil change).
1.6 Appropriate use
CF filter housings have been developed for high efficient removal of solid particles, water,
oil aerosols, hydrocarbons and odour vapours from compressed air systems. This appliance
must be used only for the purpose for which it was specifically designed. All other uses are
to be considered incorrect.
Filters are not intended for human breathing without proper ad-
ditional equipment.
Filter can only be used for fluids according to Group 2, PED 97/23
Internal corrosion can seriously reduce the safety of installation:
check it during changing the cartridge.
The manufacturer cannot be held responsible for any damage re-
sulting from improper, incorrect or unreasonable use.
Use genuine spare parts only. Any damage or malfunction caused
by the use of ungenuine parts is not covered by Warranty or Prod-
uct Liability.