Component Solution Services Verity SMM07, Руководство пользователя

Страница: 4 / 16

4
THINK
SAFETY
Read our manual before operating
or installing this system.
Most likely, your system came pre-installed so the installation
section would be for reference.
Thank you for your purchase of our Verity Rear Vison System
SMM07. When installed and used properly, your SMM07 is
designed to deliver you years of trouble-free operation. This
manual contains important information required to properly
install and operate the unit. Verity units are designed for
quick installation by trained professionals in proper
installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity products are intended to be installed as a supplement
and our observation systems and/or products are not
intended for use as substitutes for rear-view mirror devices,
or for any other standard motor vehicle equipment which may
be required to be installed on vehicles by law. Verity
products promote improving the vehicle operat
or’s field of
view. Our products are no substitute for proper defensive
driving techniques, observance of traffic laws, and motor
vehicle safety regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the drive
r’s seat (or in any
location that is visible, directly or indirectly) to the driver while
operating the vehicle. Our systems are designed to be used
primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the
SMM07. Opening the product will break the tamper indicators
and void the warranty. Contact our tech support if a problem
should arise: 574-807-6002. For faster response, fill out a
service ticket found on our website. www.verityrvs.com