Component Solution Services Verity SM05J, Руководство пользователя, Страница: 9 / 20

9
It is recommended to determine all wire connections before
making any permanent installation of components.
Connect the wires on the monitor cable to the proper
connections using Verity Rear Vision Systems Wire
Connection Key (Fig. 1) and the connection diagrams
located under connection operations (Fig. 2).
A larger wire diagram can be located on our website at
www.verityrvs.com/sm05j or by using the bar code provided
Figure 1.
Verity Rear Vision Systems Wire Connection Key
4-pin camera connectors & trigger wires
Brown -Camera 1 rear (Brown 4-pin)
Blue -Camera 2 optional (Blue 4-pin)
Red wire to key-on hot (+) 10-32v. DC (fused)
Black wire to GND. (-)
Brown wire to positive Back-up light
Blue wire to positive power Left turn signal
Brown wire to positive power Right turn signal
USE ARROWS TO ALIGN 13-PIN CONNECTION!
If force is applied to this connection when not aligned, it
may damage plug pins and void the warranty.
CONNECTIONS