Component Solution Services SMW7S, Руководство пользователя, Страница: 8 / 16

8
SYSTEM COMPONENTS
This monitor can be mounted on the dash and also on horizontal
and vertical surfaces. Make sure the view is suitable for the driver
to observe the images. Take care not to block any necessary
viewing area when mounting. Before mounting the system,
permanently hook up all connections to ensure proper operation.
Mounting Monitor
•
After determining the monitor location, position the monitor
support bracket, mark the bolt hole location and then drill the
holes. Be careful not to drill into any other surface that wires
and components may be hidden.
•
Attach monitor Fan bracket
•
Connect one end of the power cable (wire) to the proper
connections. Connect the other end of the power cable (plug)
to the monitor; connect the monitor and the camera with the
13-pin system connecting the cable.
(see page 9)
Camera Connection
Thru-wall Gasket to Seal
Thru Vehicle Exterior
Waterproof Aviation
Connectors
Be sure to use the
vibration gasket when
installing the camera. It
is package with the
camera hex wrench.
Do NOT make the cable tight from the
back of camera going into the truck