Installation Instructions Continued…
Model CP-AF36-8
3/8” x 3/8” Set Screws
(4)
3/8” x 2 ¾” Hex bolt
with 3/8” Nyloc Nut
(1 each per leg)
3/8” x 3/8” Set Screw
(1 each per leg)
Slide in leg, bolt in
place and secure
with set screw
Triple
End
A-frame
Leg
A-frame Leg
1’ Ground Cover
Holes 24” wide by 12’ deep
1.
Loosen and remove the top two nyloc jam nuts.
2.
Reassemble on to swing top rail with the carriage bolt
on top and the nyloc nut on the bottom (Or carriage on
bottom and nut on top if it won’t fit the other way.
Tighten securely so that the hanger is firmly attached in
pace and cannot slide or swivel along top rail.
3.
Attach chain through security clevis and tighten using
provided Clevis Key.
#1 Bolting Top Rail Sections Together
#2 A-Frame Leg and Third Leg Assembly
#3 Hole Sizes for Cementing in the Set
#4 Brass Bushing Swing Hanger
