Pair to Hub/gateway:
Once the camera is securely attached to the container:
Please refer to the given Hub/Gateway user manual for complete pairing instructions.
Troubleshooting:
Operation
1. If hub/gateway pairing fails first try resetting the device by performing a magnet swipe to the
right of the LED status indicator. The magnet should be held in place for 3+ seconds at which
point the LED should rapidly flash yellow/orange. Once rebooted the device will blink blue for
~20 seconds at which point it will either blink green indicating the hardware checks are okay
or red indicating a hardware fault. If green, try BLE pairing a second time. If red, replace it
with a new camera.
2. If hub/gateway pairing fails verify device ID matches intended device.
