Assembling the Cabinet
The Complete Comfort™ Cabinet sections are designed to
lock together. Align the edges as shown in figure 3. It may be
necesary to apply force to snap the tight pieces together.
1. Remove front frame B from door C.
2. Place side panel E on a firm surface. Align and
insert from frame B into one end of side panel E
(see figure 3). Firmly press down until each
corner has snapped into place.
3. Align and insert rear frame A into side panel E
(see figure 4).
4. Align and linsert remaining side panel E into front
frame B and rear frame A. Firmly press down
until each corner has snapped into place (see
figure 5).
NOTE: Side rails (D) are attached to the Complete Comfort™
Cabinet after the cabinet is installed on the Furnace / Air
Handler (see figure 13).
Assembly
CAUTION
Sharp Edges Hazard.
Equipment sharp edges can cause injuries.
Use protective gloves when grasping
equipment edges.
E
B
Snap front frame B into side panel E.
Parts interlock as shown in detail illustration.
Figure 3. Assemble Front Frame (B) to Side
Panel (E)
- Page 3 -
E
A
Figure 4. Assemble Rear Frame (A) to
Side Panel (E)
Snap rear frame A into side panel
E
B
A
Figure 5. Assemble Remaining Side
Panel (E)
Snap remaining side panel E into front frame B
and rear frame A.
506831-01
09/2011
