background image

minimum depth of 60 cm.

10.  Make a compacted gravel bed.
11.  Pull only one supply cable at a time 

through the empty conduits.

12.  Position and fix the empty conduits in the 

correct place. The distances between the 

empty conduits are shown in Figure 5: 

Foundation plate - top view.

13.  Pour out the excavation pit so that you 

obtain an even mounting surface.

 

  4  Electrical connection

  4.1  Conditions for the electrical connection

Specifications for the sub-distribution:

•  Each charging point must have its own sup-

ply line with appropriate fuse protection.

•  The Compleo X-pay payment terminal 

requires a suitable circuit breaker and 

residual current device.

• 

If possible, use an overvoltage protection 

in the sub-distribution.

Usable cable cross-sections:

• 

Use the cable cross-sections specified in 

the table. If you need larger cable cross-

sections, please specify them when orde

-

ring or call us. 

 

 

Terminal assignment X1 for supply cable, cable cross 

sections and fuse protection

Performance class

3,7 kW, 16 A

Conduc-

tor

Number

Color

L

1

brown or black

N

2

blue

PE

3

green/yellow

Supply cable

NYM-J 

3x 1,5mm² to 3x 2,5mm²

Circuit breaker

B10 A, 1-pole

RCD in subdistribu-

tion

Type A 

0,03 A/ 25 A

  4.2  Electrical connection of the payment terminal 

 

  on the wall

For the electrical connection of the payment 

terminal, proceed as follows: 

1. 

Connect the supply cable to the payment 

terminal. Follow the instructions in chapter 

4.1.

2.  Place the plastic cover on the housing.
3.  Fasten the plastic cover on the sides using 

the four metric screws.

  4.3  Electrical connection of the column

When electrically connecting the column, it 

must be observed whether or not a foundation 

plate is integrated in the foundation. If a foun

-

dation plate is integrated in the foundation, 

proceed as follows:

1. 

Pull the supply cables through the support 

legs of the column.

2.  Place the column on the foundation plate.
3. 

Fasten the column base with the four sup-

plied M12 nuts.

4. 

Connect the supply cable according to the 

Содержание X-pay











Отзывы: