Compex WPE54, Руководство пользователя, Страница: 55 / 137

Chapter 4 Common Configuration
54
The following steps will guide you in setting up WDS in the access point.
WDS Configuration Setup
From
WLAN Setup under Configuration , click on Advanced which shows the WLAN
Advanced Setup page.
Go to the
Extended Features
section. Click on the WDS
Configuration button.
As illustrated on the WDS
Setup , the WDS feature is
Disabled by default.
Select
Enable from the WDS
Global Control drop-down list
to operate WDS.
Click on the
Apply button.
Please note that if you auto select your frequency
channel (
SmartSelect ), you are not allowed to activate
WDS Global Control.
At the WDS Status page:
Click on the
Add button to
expand your WDS.
NOTE
To configure WDS, all your access points must be in the same channel; and
both your access points at opposite WDS link must have each other’s wireless
MAC address