
Chapter 5
Configure Compex WP11A Using Web Interface
19
To reserve a certain IP address for a specific workstation
1. Click on “DHCP Server Reservations” button in the Management Port Setup Menu.
2. Enter the specific IP address to be assigned to your designated PC.
3. Assign a name for the Host of the designated PC.
4. Fill in the MAC address of the designated PC in the
Hardware Address
entry.
NOTE
The DHCP server will ignore the Host Name if it finds a match in the Hardware
Address. It checks the Hardware Address first, so you need only to enter either
the Host Name or Hardware Address.
To add an entry
1. Click “Add” button to create an entry into the
DHCP Server Reservations
.
2. After the address is entered, click “Apply” button to make the updates effective.
You need to
reboot
and
logon WP11A+
again to activate the changes.
NOTE
The reserved IP address must not be within the range of DHCP start and end IP
addresses.
To view the IP released by the DHCP Server
1. Press
the
Show Active DHCP Leases
button in the LAN Setup window shown in
Figure 5.1a. The list of released IP addresses will be displayed, as shown in Figure
5.2b.
Figure 5.2b
Show DHCP Leases
NOTE
Invalid date and time shown under
Expires
column indicates that the router’s
clock of your Compex WP11A+ has not been set. Refer to
“Set System Time”
on
Page 69
to set the system’s clock.
Содержание WP11A+
Страница 1: ......