QUICK START INSTRUCTIONS
1. Read Compex
®
User Manual thoroughly.
(Available at compex.com)
2. Connect the cables - The color-coded
cables plug into the electrode sockets on
the bottom of the device.
3. Connect the electrodes - Each electrode
cable has a red snap (positive lead) and
a black snap (negative lead). Connect
the lead by snapping the lead on the
electrode.
4. Electrode placement - Position yourself
comfortably in the position shown in the
Electrode Placement Guide.
Place each electrode pad according to the
guide diagram.
5. First time use - Hold down the power
button for 2 seconds, the language menu
will appear. Select your language, set the
date, and time.
6. Push the confirmation button (B) to select
the category, and then select desired
program.
B
C
A
A
B
C
A
A
7. Select the appropriate body part, and the
level (recommended to begin at level 1).
Then click Confirmation button (B).
8. Adjust stimulation energy on the multiple
channels by pressing the channel button,
and adjust up or down on the center
navigation wheel.
Stimulation energy is displayed above
the channel button. Increase stimulation
energy upward to the maximum comfort
level and muscle contraction.
CHARGING THE STIMULATOR
Remove all electrode cables connected to
the stimulator before recharging it. Make
certain the charge pin is aligned with the
USB charging cable. See diagram.
Never try to plug in the electrode cables
simultaneously with the USB charging
cable.
TROUBLESHOOTING
If you are having an issue or if your unit is
displaying an error please visit our website
at compex.com for our Troubleshooting
guide
PRODUCT SUPPORT
Phone: 1-877-266-7398 (877-COMPEX8)
Email: [email protected]
For instructions in Spanish and French
please visit compex.com
USB charging
cable