DH16A-11DT
NO.
Description
①
②
③
Infrared area
Keyboard
①
②
③
Antenna
Specifications/features
1.With internal EM reader
2.Frequency:125KHZ
3.Effective distance:5-10cm.
4.Up to 2000 card holders.
5.Infrared keypad operation.
6.Built-in anti-tamper function.
7.Watchdog timer, powerful reboot and self-recovery watchdog
can connect with the external unlock button .
8.Power consumption: DC 12-15V, Current:150mA
9.Unlock output delay time:0~99s.
10.IP Rating:65
11.Single relay outputs.
12.relay current: 2A/12VDC
13.Dimension:115*75*21mm
front panel description
B
B
B
B
Before installing ,position the location where the controller
unit is to be mounted , operation according to the following steps:
1.Open the controller by loosening and
removing the back case screw at the
bottom using the spline tool .
2.Drill the respective holes in the rear cover
for flush mount ,drill the four holes marked
B .
3.Use the provided drilling template accurately
locate and drill the required holes.
“ ”
installation
4.Use the screws provided to mount the back
case on the wall ,be sure to draw the wiring through the large
centre hole in back case, and Keep it level.
5.Connected accurately the system wiring as per the label enclosed
on the rear.
6.Replace the unit back and screwed it on using the spline tool.
Screw anchors
System wiring
Screws
1
2
ed
