Compel VAW70, Руководство пользователя

Страница: 57 / 62

57
Note: When you set the Supervisor Password, the Power on Password item will be
automatically displayed below. You can select Enable to ask input password on post time or
Disable for going Setup Utility.
Secure Boot Status
Display current Secure Boot Status.
Secure Boot
Enable/Disable secure boot.
Erase all Secure Boot Setting
Enable this option will erase all Secure Boot Settings.
Restore Secure Boot to Factory Default
Restore all of the Secure Boot Settings to default factory settings and enable Secure Boot.
Note: only set Boot Type as “UEFI Boot Type” in Boot Menu, the Secure Boot related items
can be shown in Security Menu
Help information
Set Supervisor Password
Install or change the password and the length of password must be greater than one word.
Power on password
Enable: System will ask input password on post time. Disable: System will ask input password
when go to Setup Utility.
Password behavior
Supervisor Password and Power on Password
After set the supervisor password, power on password can enable or disable.
If only set the supervisor password, system will request supervisor password before entering
setup menu (F2). Users have 3 chances to input supervisor password, system will request
shutdown if users input wrong password 3 times.
If you set power on password, system will request the password after power on the machine.
Users have 3 chances to input power on password, system will request shutdown if users input
wrong password 3 times.
4.11.5 Boot Menu
This menu allows the user to decide the order of boot devices to load the operating
system. Bootable devices include the diskette drive in module bay, the onboard hard
disk drive in module bay.
The default Boot Type is “UEFI Boot Type”, the Boot page will show as below table:
InsydeH20 Setup Utility