Administrator’s Guide
www.hp.com
5-25
Control Panel
Agents send unsolicited reports (traps) back to a specified IP address
when a particular network activity occurs. Five traps are supported:
cold start, warm start, authentication failure, link down, and link up.
To open the SNMP Network Administration dialog box, double-click
the
SNMP
icon in the Control Panel.
1. On the
Agent
tab, enter the physical location of the terminal in
the
Location
field.
2. Enter the name of the contact person responsible for the terminal
in the
Contact
field.
3. Assign the terminal to a community by selecting a community
from the
Community Name
drop-down list. If you want to create
a new community, do the following:
a.
Click the
Add Community
button. The Community
Configuration dialog is displayed.
b.
Enter a name for the new community and click the
OK
button.
4. To add a trap destination:
a.
Click the
Add
button. The SNMP Configuration dialog is
displayed.
b.
Enter the host name or IP address of the NMS trap server and
click the
OK
button.
