Compaq ProLiant ML350 G2 Service Overview
17
Rev. 1.0
Page
17 of 24
Installation Procedures
Processors
The Proliant ML350 G2 comes standard with an Intel Pentium III processor. However, an
optional processor and Power Processor Module (PPM) can be installed. Processor option kits
for the ML350 G2 consist of an Intel Pentium III processor with an attached heatsink and a PPM.
Important:
■
If you install more than one processor, both processors must be the same type and speed.
■
The CPU1 socket must always be populated before the CPU2 socket.
■
Only install the specific PPM provided in the option kit with your processor.
Table 6: Processor Installation
Step
Action
1.
Verify that all critical data has been backed up.
2.
Ensure the server has the most current ROM version. To update the ROM, visit:
http://www.compaq.com/support/files/server/us
Caution:
Failure to flash the ROM before installing a new processor can cause system
failure.
3.
Power down and remove the access panel. (Refer to the
Setup and Installation Guide
,
listed under
References
.)
4.
Remove the internal fan baffle that covers the processor sockets.
Loosen the thumbscrew that secures the baffle to the fan
.
Slide the baffle out and away from the chassis
.
5.
Locate the processor socket and corresponding PPM slot:
