3-9
Compaq Professional Workstation AP500 Maintenance and Service Guide
Speaker
To remove the speaker:
1.
Perform the service preparations shown on page 3-2.
2.
Remove the side access panel.
3.
Unplug the speaker connector from the system board
1
, and remove the cable from the
clip.
4.
Remove the four T-15 screws securing the front of the speaker to the chassis
2
.
5.
Remove the speaker from the workstation by sliding it back, then lifting it up and out of
the chassis
3
.
1
1
3
2
Figure 3-8. Removing the speaker
To replace the speaker, reverse the above procedure.
