Compaq Deskpro EN Series Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 53

Compaq Deskpro EN Series Скачать руководство пользователя страница 48

E-2

Electrostatic Discharge

Compaq Confidential - Need to Know Required

Writer: Martha Rockecharlie Part Number: 123456-001 File Name: f-appe.doc

Last Saved On: 07/11/00 6:13 PM Last Saved By: Martha Rockecharlie

Grounding Methods

There are several methods for grounding. Use one or more of the
following methods when handling or installing electrostatic-sensitive
parts:

■

Use a wrist strap connected by a ground cord to a grounded
workstation or computer chassis. Wrist straps are flexible straps
with a minimum of 1 Mohm +/- 10 percent resistance in the
ground cords. To provide proper ground, wear the strap snug
against the skin.

■

Use heelstraps, toestraps, or bootstraps at standing workstations.
Wear the straps on both feet when standing on conductive floors
or dissipating floor mats.

■

Use conductive field service tools.

■

Use a portable field service kit with a folding static-dissipating
work mat.

If you do not have any of the suggested equipment for proper
grounding, contact your Compaq authorized dealer, reseller, or service
provider.

✎

For more information on static electricity, contact your
Compaq authorized dealer, reseller, or service provider.

«
...
46
47
48
49
50
...
»

Содержание Deskpro EN Series






















































Отзывы:

Нет отзывов