Compaq Compaq S710, Руководство пользователя

Страница: 19 / 20

Regulatory Information
German Ergonomics Notice
Compaq Computers, when tested with the Compaq
PE1030 Series monitors, were evaluated and found
compliant to the requirements of ZH 1/618 (German
Safety Regulations for Display Work Places in the
Office Sector).
EPA ENERGY STAR Compliance
Monitors that are marked with the ENERGY STAR Logo
meet the requirements of the EPA ENERGY STAR pro-
gram. As an ENERGY STAR Partner, Compaq Computer
Corporation has determined that this product meets the
ENERGY STAR guidelines for energy efficiency. Specific
details on using the Energy Saving features can be
found in the energy saver or power management sec-
tion of the computer manual.
Power Cord Set Requirements
If you were not provided with a power cord for your
monitor, you should purchase a power cord that is
approved for use in your country. The power cord must
be rated for the product and for the voltage and current
marked on the product's electrical ratings label. The
voltage and current rating of the cord should be greater
than the voltage and current rating marked on the prod-
uct. In addition, the diameter of the wire must be a min-
imum of 0.75 mm or 18AWG, and the length of the cord
must be between 6 feet (1.8 m) and 12 feet (3.6 m). If
you have questions about the type of power cord to
use, contact your Compaq authorized service provider.
A power cord should be routed so that it is not likely to
be walked on or pinched by items placed upon it or
against it. Particular attention should be paid to the
plug, electrical outlet, and the point where the cord
exits from the product.
English 17