Compaq Compaq Presario, Дополнительное руководство

Страница: 102 / 158

8-12 S
ERVICE AND
S
UPPORT
P
RESARIO
N
OTEBOOK
B
EYOND
S
ETUP
G
UIDE
1200 S
ERIES
The Test tab has the following main regions: Types of Test,
Test mode, an Information Window, and a Component List
(under the Type of Test box). The Component List resembles
Windows Explorer: Click the
+
to open a component folder,
then the component for information about it. The information
window may show further tests that can be performed on
certain components. You can request any or all of the subtests.
Testing Equipment
To run a test, complete the following steps:
1. Click the Test tab.
2. Choose the type of test: Quick, Complete, or Custom . In
Custom, you will need to check the boxes in the
Component List for each test you want.
3. Select Interactive mode or Unattended mode.
4. Click the Begin Test button at the bottom of the window.
The Status tab automatically replaces the Test tab on your
window. You can follow the progress of individual tests on
this window.
When the tests are complete, the progress bar in the Status
window is green if the test is successful and red if the
test fails. The lower part of the Status tab provides details of
the tests that are completed.
The Long tab lists all the tests and also provides information
about the number of times each test was run, the time
taken for the test, and the number of errors detected. You can
save this information by clicking the
Save button at the
bottom of the window.
The Error tab provides details about the errors detected,
including error codes. These error codes reveal useful
information that a Compaq technician uses to advise you on
how to correct problems with your Notebook.