Managing Power
3-5
Writer: Chris Gales Saved by: Chris Gales Saved date: 12/23/98 10:16 AM
Part Number: 387710-001 File name: Ch03.doc
Initiating Hibernation
Hibernation is initiated in the following ways:
■
Under Windows 98 using Advanced Power Management
(APM), press
Fn
+
Suspend button or select Start
£
Settings
£
Control Panel
£
Power Management
£
Hibernation tab.
Select On.
■
Under Windows 98 using APM or Advanced Configuration
and Power Interface (ACPI), initiate Hibernation by closing
the computer, sliding the power switch, or pressing the
Suspend button.
CAUTION:
If Hibernation is turned off, the computer does not
initiate Hibernation when a critical low battery condition is reached.
If Hibernation is turned off, the computer initiates Suspend until the
battery pack fully discharges. When this occurs, all unsaved
information is lost.
CAUTION:
If you receive a critical low battery warning, do not
initiate Hibernation. Save all data and turn off the computer.
IMPORTANT:
While using the modem with communications
software (on models with an internal modem), the modem will
disconnect when Hibernation initiates or a low battery condition
occurs. After exiting Hibernation or resolving the low battery
condition, restart the communications software to restore the
original modem settings.
Exiting Hibernation
To resume work after Hibernation has initiated, follow these steps:
1. If the battery pack does not have enough charge to exit
Hibernation, insert a fully charged battery pack or connect to
an external power source.
2. Turn on the computer by sliding the power switch. The
computer exits Hibernation. Information saved to the hard disk
returns to the screen at the point when Hibernation initiated.
NOTE:
To stop the restoration of information, press
Fn+Ctrl+Break
.
Содержание Armada 1500C series
Страница 62: ...I 4 Index ...