Compaq AlphaPC164, Процедуры обновления прошивки

Страница: 10 / 17

4
A display appears showing information about the devices on your system. In the
following example, DKA400 is the CD–ROM device:
dka0.0.0.9.0 DKA0 RZ26L 440C
dka400.4.0.9.0 DKA400 RRD43 1084
dva0.0.0.0.1 DVA0
ewa0.0.0.7.0 EWA0 08-00-2B-E2-B1-08
pka0.7.0.9.0 PKA0 SCSI Bus ID 7
•
The letters DK refer to a SCSI CD–ROM.
•
The letter A refers to the SCSI bus designation. Refer to the hardware owner’s
guide for more details.
•
The number 4 refers to the drive number.
1. Using the following syntax, enter the boot command to boot from the CD–ROM:
boot device-number
For example, to boot the system from CD–ROM drive number 4, enter:
>>>boot dka400
2. Press the Enter key at the
Bootfile:
prompt to run the LFU.
3. The LFU menu is displayed followed by the
UPD>
prompt. Enter
list
to get a list of
the options available for the system.
The LFU
list
command shows a list of memory-loaded images and currently
supported flash ROMs. In the following example, only three devices can have their
firmware updated:
UPD>list
Device Current Revision Filename Update Revision
fsb 3.1 fsb_fw 3.1
fw 5. 4 srm_fw 5.4
fwb0 3.10 dfxaa_fw 3.10
dfeaa_fw 1.3
dfeab_fw 3.10
kzpsa_fw A10
4. Enter
update option-name
at the
UPD>
prompt to update one option at a time
or
enter
update
to update all options.