Compaq AA-RHBYA-TE 135267-001, Руководство пользователя

Страница: 47 / 256

Managing the Switch 3-11
To enter an IP address:
1. Use <Up> and <Down> to increment or decrement the displayed value.
The underlined cursor indicates the numbers to modify.
When entering a number, <Up> and <Down> start in the slow mode and move
to the fast mode if the button is held down. The numbers go to a maximum of
255 and wraps to zero; for a large number, it may be faster to use the <Down>
button.
2. After entering a number, press <Tab/Esc> to move the cursor to modify
the next field.
3. After setting the IP address, pressing <Enter> stores the value.
Ethernet Subnetmask
Pressing <Enter>, while
Ethernet Subnetmask
is selected, displays:
Ethernet Subnetmask
none
The default subnet mask value is none. Refer to the network administrator for
the appropriate subnet mask.
Enter the Switch’s subnet address by using <Up> and <Down> to increment or
decrement the displayed value. The numbers with the underline cursor is the
group to modify.
Fibre Channel IP Address
Pressing <Enter>, while
Fibre Channel IP address
is selected,
displays:
Fibre Channel IP Address
0. 0. 0. 0
The default Fibre Channel IP address is
0.0.0.0
, as shown in the example.
Entering a valid non-zero IP address allows the Switch to transfer IP over the
Fibre Channel and the ability to manage all other switches connected to the
Fabric. All Switches must have Ethernet IP addresses on a different subnet
than their FC IP addresses. The FC IP addresses of all Switches must be on the
same subnet.
To update the Fibre Channel’s IP address: