Compaq 5525B/31/32, Руководство пользователя

Страница: 99 / 140

99
8
Commands
Command Shell Overview
The PrintNet comes with an in-depth command shell called “npsh.” It
allows you to manipulate objects like destinations, I/O ports, and models
and provides monitoring and troubleshooting capabilities.
npsh Access Methods
There are many ways this command shell can be accessed:
•
built in HTML forms
•
a Telnet session from a TCP/IP host to the PrintNet
•
a single remote shell command (i.e. rsh, rcmd, remsh) from a TCP/IP
host
Main npsh Command Prefixes
All configurable commands either start with “ store ” or “ set ”,
troubleshooting commands usually start with “ debug ”, and view
commands start with “
list
”.
NOTE: If the “
store
” prefix is used, the PrintNet must be repowered to
make the changes take effect. Since “ store ” affects flash
memory settings only, the print server must reset and read the
new settings now in flash memory.
NOTE: If the “ set ” prefix is used, a “ save ” command must be executed
as well so that the new settings are retained after power cycles.
Since “
set ” only affects the settings in memory, they will be lost
after a power cycle unless they are saved to flash memory.