Company NA Master Fade, Руководство пользователя

Страница: 14 / 28

MasterFadeuser manual
01.09.2014.
- 14 -
H
OW TO
EDIT
A STATIC MEMORY UNDER
SCENE/ RELAY
OR
FADER
MENU
?
Memory editing under fader/ scene menu are exactly the same .
To edit a memory under Scene or Relay menu, do these following steps:
Step 1: Long- press an active Rel/ Scn button on touchscreen as shown in the picture.
Step 2 : Press " EDIT " button. This will bring you to the DMX signal editing window.
Step 3 : Tap on the cell you want to edit. The frame of the cell will turn yellow.
Step 4 : Edit the value as you want using 6 faders. Value if fader is at 100% will be 255.
Remember: DMX value editing isn't sensitive to master fader. When you have
completed editing, press " EXIT ". This will bring you to confirmation window.
Step 5 : If you want to save, press " YES " button. If you want to discard the changes
made to DMX values , press " NO ".
Fader page memories have slightly different recording options and access but identical
static memory editing.
To
edit a memory in fader menu, in one of 8 pages, you have to do following steps:
Step 1 : Press " Fader " button which is located at the right side of the touchscreen.
Step 2 : Press and hold one of 8 page buttons with loading bars on top. A window will
pop-up.
Step 3 : Choose a memory you want to edit (DMX value editing is only for static
memories!). A window will pop-up.
Step 4 : Press EDIT . A window with all 512 DMX values (bars) will pop-up.
Step 5 : Edit the DMX values as necessary using 6 faders and press " EXIT " on upper
right corner.
Step 5.1 : You can press MENU button and change DMX values by +5% (ALL +5%) or -
5% (ALL -5%) .
Also, it is possible to NULL all values by pressing " ALL ZERO " button.
NOTE : Cells with empty values won't have any changes after +/-5% button press.
Step 6 : If you want to save the changes, press " YES " button.
Result : Fader LED's will start blinking if the fader values won't match with input values
in cell. All DMX value changes are saved if you have pressed " YES " in step 6.
TIP : when editing memory cells, use " Flash/ Chase " buttons to remove the fader status
levels faster
NOTE!
You can't edit dynamic memory
recordings.