background image

4

•  Ensure correct DC clamp connection ‘

polarity

’ when ‘connecting’ to the battery being charged. Connect the ‘

Red

’  

coloured DC clamp to the positive ‘+’ battery terminal. Then connect the ‘

Black

’ coloured DC clamp to the negative  

‘-’ battery terminal

•  Immediately cease charging if the battery being charged is found to be excessively hot, leaks or appears to be  

taking a long time to charge

•  This product must not be used by children or by an adult who has reduced physical or mental capabilities. Also,  

this product is not to be used by an adult who has a lack of knowledge or experience with this type of product,  
unless they are being supervised by a person who is competent in the safe use of this type of product

•  Caution should be taken when charging an accessory battery when connected to a ‘Dual Battery Monitor’ or a  

‘Volt Sensitive Relay’ (VSR). It is important that the battery circuit is ‘open’

•   Note: This product is designed for portable short term use. It is NOT suitable for long term permanent installation

CAUTION

Care must be taken when handling this product and while in use:

•  Do not stand on the Solar Mat panels
•  Do not bend the Solar Mat panels
•  Do not throw or drop the Solar Mat onto the ground
•  Ensure that the Solar Mat is unfolded carefully, while at the same time supporting each panel
•  Ensure that the Solar Mat is placed onto a cleared and flat as possible area while in use
•  Pick up and fold the Solar Mat by supporting the whole panel, not by the panel corner or edge
•  Ensure that the Solar Mat is packed within the vehicle as to not cause damage by crushing or bending 
•  Any damage to the Solar Mat, Panels or Cells caused by inappropriate handling may void the warranty

Содержание COMPBI023

















Отзывы: