6
1
TO OPERATE
NOTE: The shower head settings, Shower and Center, can only be used when
operating with a Companion Camp Shower.
The Companion Camp Shower will NOT provide suitable water flow if other settings
are selected. These may be suitable when connected directly to a tap hose.
Step 1.
Ensure stand is assembled securely. Adjust to required height.
Step 2.
Adjust shower head position. (Fig.1)
Step 3.
Select required setting on shower head. SHOWER or CENTER setting
can only be used with Companoon Camp Shower. (Fig.2A & 2B)
Step 4.
Turn Water Flow Control valve to ‘On’ position. (Fig.3)
Step 5.
Operate Aquacube
®
Camp Shower as per normal.
Step 6.
Once operating, the water flow can be turned On and Off using the
Water Flow Control valve on the shower stand. (Fig.3)
Step 7.
To reignite the burner, turn the Water Flow Control to ‘ON’ and water
will flow from the shower head and the burner will reignite within 5 to
10 seconds.
NOTE: The Outdoor Shower Stand can also be used when directly
connected to a garden water tap or other water pumps.
IMPORTANT: Water remaining in the Companion Camp Shower while the
flow is stopped may become hot. When the flow is resumed the user
must check the temperature output to ensure that is it suitable and
not too hot.
ON
OFF
2A
2B
3