MALONE – MAL-BS52 7
For assembly advice or parts go to www.farmersfurniture.co.nz or call 0800 100 858
STEP 3
– RH END
Lay the
RH End
on a smooth clean surface with holes facing upwards.
Attach two
Cabinet Drawer Slides
to the RH End using the
H61 Small Silver Screws
. Use the holes as
indicated in the diagram below - each slide requires two screws. Ensure that the Slides are facing
the same way as in the diagram.
Insert two
H2 Large Cams
as shown in diagram. Ensure the arrow on the top of the Cam points
towards the top edge of the End.
Push two
H15 Dowels
into the top edge of the End.
H1
H2
H61
H15
ASSEMBLE THE UNIT
STEP 4 -
ENDS TO TOP
Stand the Top on its back edge.
Fit the LH End and RH Ends to the underside of the Top. The Connecting Bolts in the Top will fit into
the Metal Cams in the Ends.
Turn the Metal Cams in a clockwise direction to lock the Top to the Ends. Ensure they turn a least a ¼
to ½ a turn.
Front Edge
H61 Small Screw
H61 Small Screw
