K01070 | v. 22/09/2014 | Ref. quality process 002/03 | ORIGINAL INSTRUCTIONS
9
8. REGULATION
8.1. Grinder set up
Place the hopper ( ) on the grind regulator ( ) and make sure the bean trap ( )
is in the closed position. Lock the hopper (
) in place using a flat head screw driver
to gently tighten the hopper security screw making it match to the hole at the bean
hopper collar ( ) (
Fig. 1
).
Remove the hopper lid (
), fill the Hopper with coffee (
), and replace the lid on the
hopper ( ) (
Fig. 2
).
Plug in the grinder, and place the main power switch ( or ) to position
I
and open
the bean trap ( ) to allow coffee to pass into the grind chamber. In the
TOUCH
ADVANCED
model, place the main power switch ( )
ON-OFF
in position
ON
and
place the mode switch ( ) on mode
MANUAL
(
M
).
In the
PUSH
/
TOUCH
models, the power switch
I-0-II
is situated on the right side
and on the
TOUCH ADVANCED
the main power switch is situated on the right side
while the MODE switch is on the left hand side
