LBI-38435B
11
USING THE RADIO (2 CHANNEL)
To Receive a Message:
1.
Turn the radio on (channel indicator lit). If not,
press POWER switch.
2.
Select the desired channel by pressing either the
1 or 2 switch.
3.
Press and hold MONITOR switch and then
adjust VOLUME controls for the desired
listening level. Release MONITOR switch.
4.
Radio is now ready to receive a message.
To Transmit a Message:
1.
Confirm that the radio is turned on (channel
indicator lit). If not, press POWER switch.
2.
Select the desired channel by pressing either the
1 or 2 switch.
3.
Press and hold MONITOR switch and then
adjust VOLUME controls for the desired
listening level. Release MONITOR switch.
4.
Decide what you want to say. If you intend a
lengthy message (or several messages) the
vehicle engine should be running to maintain the
battery charge.
5.
Observe the BUSY indicator and press the
MONITOR switch to assure that the channel is
not in use.
6.
Remove microphone from hookswitch, press the
PTT switch and identify yourself. The XMIT
indicator will light each time the PTT switch is
pressed.
7.
Release the PTT switch and wait for an answer
to your call. Then, complete your message.
Always speak in a normal voice. Hold the
microphone cupped in your hand and touching
your cheek lightly. Speak across the face of your
microphone, not directly into it. Shouting will
actually reduce your radio range, so do not speak
any louder than normal.
USING THE OPTIONAL EIGHT (8) OR
SIXTEEN (16) CHANNEL RADIO
(WITHOUT SCAN)
To Receive a Message:
1.
Turn the radio on (channel indicator lit). If not,
press POWER switch.
2.
Select the desired channel by pressing either the
ADD or DELETE switch.
3.
Press and hold MONITOR switch and then
adjust the VOLUME controls for the desired
listening level. Release MONITOR switch.
4.
Radio is now ready to receive a message.
To Transmit a Message:
1.
Confirm that the radio is turned on (channel
indicator lit). If not, press POWER switch.
2.
Select the desired channel by depressing either
the ADD or DELETE switch.
3.
Press and hold MONITOR switch and then
adjust the VOLUME controls for the desired
listening level. Release MONITOR switch.
4.
Decide what you want to say. If you intend a
lengthy message (or several messages) the
vehicle engine should be running to maintain the
battery charge.
5.
Observe the BUSY indicator and press the
MONITOR switch to assure that the channel is
not in use.
6.
Remove the microphone from the hookswitch,
press the PTT switch and identify yourself. The
XMIT indicator will light each time the PTT
switch is pressed.
7.
Release the PTT switch and wait for an answer
to your call. Then, complete your message.
SCAN OPERATION
The SCAN function allows monitoring of up to eight
or sixteen receive channels (depending upon which
control module is being used). The scanned channels may
be any frequency within the frequency band limits of the
radio and may be Channel Guard protected. The radio
message will then be received only if the correct Channel
Guard signal is present.
Any channel may be scanned with or without priority
level. One channel may be programmed for Priority 1
(P1) and another for Priority 2 (P2) with any or all
remaining programmed channels being scanned as non-
priority (S).
Receive Scan Rate
The scan rate for the radio will vary depending upon
the number of channels programmed into the scan
memory and whether or not Channel Guard is
programmed. For a sixteen channel radio, the scan rate
will vary from 1.1 to 4.4 seconds for non-priority
channels, and 0.3 to 1.2 seconds for Priority 1 and 2
NOTE
Содержание LBI-38435B
